Translate

Sunday, September 25, 2016

Dorco Prime Revisited -- Happily

I continue to use and tinker with my single-pass, mostly-against-grain shaves, which is my shaving method of choice -- especially when I've got the right equipment in my fingers. Bear in mind that I use light pressure and always use long, slow buffing strokes; that is, the razor stays in contact with my face during both the shaving and return strokes. This constant-contact technique helps to re-spread moisture and lather as I shave. After the solitary main pass, I always make touch-up strokes, often with some additional added moisture, to complete those patches not already sufficiently smooth.

Yesterday I had the brainstorm to pull out my Dorco Prime one-piece (that is, twist-to-open) razor. This razor is a high-quality instrument. It's a visual twin to the Weishi 9306-F, but it's not an identical twin. The razors (Weishi vs. Dorco) have slightly different weights, and I'm now convinced (as I suspected months ago) that the razors have different shaving characters. The Dorco Prime razor is slightly more aggressive, which is a good thing. Its shave character is such that it is still mild, but it's just aggressive enough to provide a good shave to guys like me without much risk of injury.

Not only is the Dorco Prime razor of good quality, when one acquires the starter set, which is a terriffic value, it includes a cache of Dorco ST-301 blades, which I find to be of high quality and utility, while still being priced very reasonably.

   

Another nice aspect of the Dorco Prime starter set is the nice case for the razor. It is a cut above the typical plastic case that comes with some razors.

I'm going to continue to use the Dorco Prime razor, which has now been awarded a place in my in-bathroom shaving drawer. This, in addition to my favorite Merkur 33C, will be one of the razors that I go to for daily use. So if you are one who likes the convenience and general performance of a one-piece razor, and also likes a relatively mild shave character, I would suggest that you give the Dorco Prime marque another look.

Happy shaving!



Saturday, September 17, 2016

The Right Tool For the Job

I don't know about you, but I surely wouldn't use a screwdriver to drive a nail. And I wouldn't use a pair of pliers to tighten a bolt. Obviously, it's usually a good idea that whenever possible to use the right tool for the job at hand.

Shaving is somewhat similar. Not only are there razors better suited to one's beard and skin, but there are also razors better suited to one's shaving process.

It remains my belief that much of the shaving world -- that is, beyond the rather small sub culture of shaving enthusiasts -- performs a one-pass, with-grain shave. As a result, many razors have been designed with that process in mind. However, despite the razor-designer's intentions, some razors are better suited for one shaving process over another.

Below, I'm going to give some examples, but keep in mind there are true for me. My examples may not be true for you and your skin and beard. My examples are merely.... well, examples.

1) I've continued to experiment with one-pass, against-grain shaves. (Note: the term, one pass, means one primary pass. No matter how many passes I take, I usually add several clean-up strokes to address areas not sufficiently smooth.) I have found that if I take slow against-grain strokes with light pressure, I can use my Merkur 33C Classic three-piece razor and get as good a shave as if I started with with-grain strokes and worked my way to against-grain strokes.

At the other extreme, when I take my Gillette Slim Adjustable set on its mildest setting, a single, against-grain pass is going to produce weepers and irritation.

Using my Gillette Tech (c. 1948) and the same against-grain single pass yields results somewhere in between.

2) However, setting my Gillette Slim to about 3 (out of nine), which is still a mild setting, I can do a one-pass shave that is largely with grain but includes some cross-grain strokes, and can get a good shave. I can't do that with the Merkur 33 and get the same closeness.

3) It's my opinion that more aggressive designs such as slant-bar razors or those with more blade exposure were drawn up with a single-pass, with-grain shave in mind. Oh, I understand that many shavers will use these for cross-grain and against-grain strokes -- some quite successfully; but for many of us these razors are best left for single-pass, with-grain shaves.

I also have found that three-piece razors -- at least the milder-shaving variety that I tend to prefer -- are much more comfortable shaving against grain as compared to one-piece designs (butterfly-door, twist-to-open razors). Even my Weishi 9306, though extremely mild, doesn't give the best against-grain results -- especially when doing single-pass, against-grain shaves. The Weishi 9306 is best used for multi-pass shaves.

As every handy man knows, it's best to use the tool that is best suited for the task at hand. Shaving choices are no different.

Happy shaving!